Technical Specifications - MPM MGJ-01M Mode D'emploi

3. Wipe the base unit (1) with a damp cloth (do not clean the heater shield (3)) and then wipe
it dry.
CAUTION! Never immerse the base unit in water.
4. You may wet the heater shield (3) with a little of a kitchen detergent, wipe with a cloth damp
with clean water, and then dry.
5. Frequently remove the scale from all surfaces in contact with water when the appliance is
operated. Descale the appliance with citric acid descaling agents. Follow the instructions
for use from the descaling agent's manufacturer. Do not allow the descaling agent enter the
base unit interior when descaling the heater shield (3).
CAUTION! Never heat any descaling agent with the appliance.

TECHNICAL SPECIFICATIONS

See the product's nameplate for technical specifications.
Power cord length: 0.65 m
CAUTION! MPM agd S.A. may change the technical features of the product without notice.
PROPER DISPOSAL OF THE PRODUCT
Poland Marking on the product indicates that after the service-life of the product expires, it should not be disposed
with other type of municipal waste. Used equipment may have a negative impact on the environment
and health of people due to potentially containing hazardous substances, mixtures and components. Mixing
electric waste with other types of waste or disassembling those in an unprofessional manner may cause
a release of substances that are hazardous to the environment and health. Used equipment should be handed-over to
a point for collection of electric waste. In order to obtain detailed information regarding the electric waste collection points,
the user should contact the municipal point of electric waste collection or used equipment processing department.
10
(waste electrical and electronic equipment)