Publicité
Les langues disponibles
Les langues disponibles
M8x25mm
speedometer
holding rubber
washer
———————————————————
Rev.00 02/03/2015
grains points
bracket to the top yoke
head light attachment
Zubehör von
10. Pre-mount controls of the
vehicle at the LSL-handlebar.
Lay down the handlebar in the top
yoke and mount the LSL-top clamp
with M8x25mm.
Important!
Mount LSL-top clamp with marking
(grains point) in front of the vehicle.
First tighten the two front bolts
M8x25mm on block.
Now tighten the two rear bolts
M8x25mm with manufacturer´s
torque!
11. Mount LSL speedo/head lights
bracket with two orig. bolts at the
top yoke.
Mount the head lights with two orig.
bolts at the LSL speedo/head lights
bracket.
Take orig. rubber of speedo fixing
to the LSL speedo/head lights
bracket.
12. Connect the speedometer plug
and put it in the speedometer holding
rubber.
Put the two supplied washers in
position.
—
Das Original
——
Seite 7 von 12
Publicité
