Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Mounting through ductwork
Mount the PlasmaMade Airfilter through (not supplied) ductwork. The channel adapter
can be connected and bolted onto the ductwork. Use the screws 3.5x13 mm to clamp
the channel adapter to the engine case and the PlasmaMade Airfilter. Connect the AC
adapter with the PlasmaMade Airfilter (at the top) and the socket.
After activation of the extractor hood, the automatic operation of the filter is put in
motion.
26
Publicité
Table des Matières
