Flush Mount - Phoenix Gold RX65CS Manuel

Component Speaker Owner's Manual
TWEETER INSTALLATION

FLUSH MOUNT

With a variety of supplied mounting options, the RX Series series tweeter is
easy to install in any vehicle. Each component set comes with a flush mount and
surface mount installation kit. For other custom mounting configurations, please
contact your authorized Phoenix Gold Dealer.
Flush Mount: For optimal tweeter installation, use the Flush Mount option. The
Flush mount requires 3⁄4" depth and a 1-13/16" hole in the mounting surface.
(figure 4) (figure 5)
The RX Series tweeters pivot in their housings. This allows the user to align the
tweeter during the installation process for optimum listening results.
For best results, always try to maintain equal path lengths between the right
and the left tweeter and the listening position. This is usually accomplished by
mounting as low and deep as possible in a kick panel installation, or high and
deep in a dashboard installation. Be cautious in dashboard installations not to
reflect the tweeter off of the windshield: this increases reflections and can greatly
diminish the overall system listening quality. For door panel installations, try to
angle the tweeters toward the listener to optimize high frequency performance.
SURFACE MOUNT
Surface Mounting Options: Screws are provided for use when cutting a hole in
the door panel or other mounting surface is not an option. Make sure that the
surface mount location is free of passenger movement that might damage the
tweeter. (figure 6)
© 2013 Phoenix Gold • www.phoenixgold.com