Signature Design by Ashley P414-776 Mode D'emploi page 12

7. Cover the Lid (A) on the fire bowl.
8. Make sure the control knob is in the "OFF"
position. Unscrew the push button cap on
the ignition module located on the control
panel to access the Battery(K) compartment.
The ignition module requires one AAA size
Battery(K).
9. Pull the door open and place the propane
gas tank (not included) into the tank holder.
Tighten the preassembled
clockwise to ensure the propane tank is
secure. Replace the door after the tank is
connected to the regulator.
P414-776
INSTALLATION
wing screw
A
K
Page 12 of 46