Power Bright ML1000-24 Mode D'emploi page 5

Multiply: AC AMPS X 110 (AC voltage) = WATTS
This formula yields a close approximation of the continuous load of your
appliance.
Multiply: WATTS X 2 = Starting Load for most appliances
This formula yields a close approximation of the starting load of most
appliances. Exceptions are motorized appliances such as pumps,
freezers and air conditioners. These appliances can have startup loads
of up to eight times the rated watts.
Front Panel ML1000-24
A. Two standard North American AC outlets, each rated at 15 Amps
B. Overload LED Indicator. If continuous power draw of appliance(s) exceeds
1000 watts, this light will turn ORANGE/RED and the inverter will
automatically shut down. When this occurs, turn off the inverter and
determine the cause of the overload before turning the inverter and the
appliance back on.
C. ON/OFF Switch. Turns the inverter circuits ON and OFF.