Setting Up Display - Huion KAMVAS 22 Manuel D'utilisateur

EN

2.3 Setting Up Display

[1] Take out the pen display and stand from the package, then assemble the stand
to the back of the display with attached screwdriver according to the following
instruction.
[2] Connect the pen display to your computer with 3-in-1 Cable or USB-C to USB-C
Cable.
1) Connect the display to your computer with 3-in-1 cable;
Connect the power adapter to the power cable.
Adjust the stand angle
by dragging this switch
USB Cable
HDMI Cable
Power Adapter
Power Cable
6
GS2201