Maintenance; Airborne Noise; Handlebar Vibration; Control And Lubrication - Bertolini 316 Utilisation Et Entretien

MAINTENANCE

GENERAL RULES
Regular maintenance is extremely important
for ensuring the best performance and long-
life of the motorcultivator.
It is thus advisable to:
- periodically clean the motorcultivator,
spraying it with water to remove dust, mud
and dirt.
- at the end of each day spray the inside of
the hoe with water to remove any mud or
dirt built-up.
- when the machine is used as a mower,
clean the entire cutting unit at the end of
each day in order to remove any accumulated
grass or dirt, lubricate the unit with grease
or fuel oil.
- carry out the schedule of checks and
lubrications described below.
Period
Position
Engine oil
Air filter
Gearbox oil
Rotary hoe box oil
Battery fluid
Starter motor
Tyres
Periodically use oil to lubricate rods, hinges, cable passages and all points subject to
movement that are accessible from the outside.
CONTROL AND LUBRICATION PROGRAM
Every 10
Daily
See engine Use and Maintenance Manual
Check level
Control level
Check collector and brushes once a year

AIRBORNE NOISE

Acoustic pressure recorded at 1,6 m off the
ground in the centre of the handlebars by a B
& K 2230 instrument facing the engine.
Maximum level of acoustic pressure sta-
tistically weighted equivalent.
- Motorcultivator: 88,3 dB (A)
- Mower: 90,7 dB (A)
Sound Power:
- Motorcultivator: 104,6 dB (A)
- Mower: 104,6 dB (A)

HANDLEBAR VIBRATION

Statistically weighed measurement in accor-
dance with ISO 5349:
- Motorcultivator: 5,5 m/s
- Mower: 16,2 m/s
Data refers to maximum values recorded with
the range of engines available.
First 20
hours hours
Check
Check tyre pressure periodically
56
2
2
Every 500
hours
Change