Publicité
Les langues disponibles
Les langues disponibles
Assembly Instructions for Model Numbers 818, 824, 830, 836, 842, 848
IMPORTANT INFORMATION
Remove collar, tags, and leads from pet before placing it in the home to prevent possible entanglement.
Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case
of return or exchange, failure to return product in similar condition as received could result in limited reimbursement.
Please save sales receipt as proof of purchase for warranty purposes. Check to ensure you have all the parts below. If
you discover any parts are missing, immediately call our toll-free service helpline at 1-800-428-8560 (Monday - Friday
9 a.m. to 4 p.m. EST) or email customer service at info@midwesthomes4pets.com.
Parts Include: Fold & Carry Pet Home, Plastic Pan, Divider Panel, and Plastic Carrying Handle(s)
ASSEMBLY INSTRUCTIONS
1.
Lay crate on flat surface so plastic pan is on bottom
and wires are facing up, then unlatch the locking
device located on side of crate.
2.
Grab any wire on the top panel and turn it like the
page of a book. Then grab the top and side panel
and pull upward. This will form the shape of the
crate.
3.
Make sure the bottoms of the two side panels rest
inside the bottom panel (as illustrated), and that one
edge of the top panel is "inside" the side panel and
"outside" of the other side panel.
NOTE: To view our crate assembly
video, scan the QR code or visit:
https://youtu.be/X7U2ghyA4R8
4.
Reach in the home and pull the door panel forward
until it fits into the clips on the ends of the side
panel. Repeat with the end panel.
822DD, 824DD, 830DD, 836DD, 842DD, 848DD
2
3
800-428-8560
midwesthomes4pets.com
P.O. Box 1031
Muncie, Indiana 47308
Locking
Device
Top Panel
Inside/Outside
Side
Panels
Inside/Inside
Bottom Panel
4
Publicité
Table des Matières
Manuels Connexes pour MID WEST Contour 818
Sommaire des Matières pour MID WEST Contour 818
- Page 1 800-428-8560 midwesthomes4pets.com P.O. Box 1031 Muncie, Indiana 47308 Assembly Instructions for Model Numbers 818, 824, 830, 836, 842, 848 822DD, 824DD, 830DD, 836DD, 842DD, 848DD IMPORTANT INFORMATION Remove collar, tags, and leads from pet before placing it in the home to prevent possible entanglement. Unwrap and remove all parts from the box.
- Page 2 To secure the door panel to the top panel, gently U-Wire for Sizes 24”, 30”, 36” pull forward on the door panel while pushing down on the top panel. Then fit the hooks over the end wire on the top. Repeat with the end panel. Note: Sizes 42”...
- Page 3 Maintenance: To protect the finish your crate and the bottom pan, use only mild, non-abrasive cleaners and water. Any coarse scrubbing or abrasive materials could damage finish. Do not expose the plastic pan to direct sunlight for extended periods of time as this may lead to warping or damage of pan.
-
Page 4: Renseignements Importants
800-428-8560 midwesthomes4pets.com P.O. Box 1031 Muncie, Indiana 47308 Consignes d’assemblage pour les modèles no 818, 824, 830, 836, 842, 848 822DD, 824DD, 830DD, 836DD, 842DD, 848DD RENSEIGNEMENTS IMPORTANTS Pour ne pas emmêler les objets, retirer le collier, la plaque d’identité et la laisse avant de mettre l’animal dans la cage. - Page 5 U-Wire pour Pour attacher fermement le Panneau de porte au les tailles 24”, 30”, 36” Panneau supérieur, tirez doucement le Panneau de porte en avant, en poussant le Panneau supérieur vers le bas. Ensuite, positionnez les crochets au-dessus du fil métallique de l'extrémité...
-
Page 6: Entretien
Entretien: Pour protéger la finition de votre Cage pour animal et de la Base, ne les nettoyez qu'avec un produit non abrasif et de l'eau. Frotter trop fort ou des produits abrasifs peuvent endommager la finition. Afin de diminuer le bruit, disposez dans la caisse sous le bac un morceau de moquette ou un morceau du carton de la caisse. - Page 7 800-428-8560 midwesthomes4pets.com P.O. Box 1031 Muncie, Indiana 47308 Instrucciones de armado para los Modelos Número 818, 824, 830, 836, 842, 848 822DD, 824DD, 830DD, 836DD, 842DD, 848DD INFORMACIÓN IMPORTANTE Remueva el collar, la identificación y las correas de la mascota antes de ponerla en la jaula, para prevenir posibles enredos.
- Page 8 U-Wire para Para fijar la puerta al panel superior, tire los tamaños 24”, 30”, 36” suavemente hacia adelante la puerta mientras presiona hacia abajo el panel superior. Luego, fije los ganchos en el último alambre de la parte superior. Repita con el panel posterior. Nota: Los tamaños de 42"...
- Page 9 Mantenimiento: Para proteger la terminación de su jaula Pet Home y la bandeja inferior, use solamente limpiadores suaves no abrasivos, y agua. Cualquier fregado áspero o materiales abrasivos pueden dañar la terminación. Para ayudar a reducir el ruido, coloque un pedazo de alfombra o corte un pedazo de la caja de la jaula y colóquelo dentro de la jaula debajo de la bandeja.