Sea gull lighting 78027 Guide Rapide page 2

Install the Fixture
1A
JUNCT
MOUNTING PLATE
FIXTURE BASE
THUMB NUTS
SHADE SCREW
Secure the mounting plate to the junction box.
1
Connect the fixture to a suitable ground in accordance to local electrical codes.
2
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
3
4 Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
5 Mount the fixture base onto the mounting plate studs and secure it with the two thumb nuts.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage information.
6
7 Place the shade onto the base and secure it in place with the shade screws.
ION BOX
3
4
5
2
5
6
2
MOUNTING PLATE STUD
SOCKET
LAMP
7
SHADE