OPERATING INSTRUCTIONS
CONTROLS AND SETTINGS
01. Power Button
Push once to turn on the air purifier and the unit will start immediately on
the AUTO setting
.
02. Fan Speed Button
Change the fan speed to AUTO, Low, Medium or High.
a) AUTO Fan Speed
Fan speed will automatically adjust according to the air quality
indicator ring. If the indicator detects poor air quality (red ring), the
fan speed will automatically turn to High. If the indicator detects great
air quality (blue ring), the fan speed will automatically switch to Low.
03. Timer Button
Set the purifying duration for 2, 4 or 8 hours.
04. Ionizer Switch
Turn on the optional Ionizer to help your air purifier trap airborne
particles more efficiently.
05. Filter Replacement Indicator
Only when the True HEPA filter needs to be replaced will the indicator
beside the Power Button
illuminate. Follow the FILTER REPLACEMENT
instructions on pages 13-14 and when completed, reset the indicator
by pressing and holding the Power
seconds.
06. Night Mode
To dim the indicator lights, press and hold the Power Button
seconds. To exit night mode, press and hold the Power Button
seconds again.
02
and Timer
buttons for 2
for 2
for 2
9
03
01
02
10
04.
04