Bluetooth Input; Enter Password - Vision SB-1900P Manuel Du Propriétaire

BLUETOOTH INPUT

The first time you connect you will need to pair your device. For this example we will pair a phone.
1. PRESS SOURCE TO ACTIVATE BT INPUT Blue Indicator will start flashing
2. ON PHONE GO INTO SETTINGS/BLUEOOTH You will see the SB-1900P listed. If not it may already
be paired to another device (Blue indicator will have stopped flashing). Press PAIR button on the
remote control, or Press and hold PAIR button on the speaker, until blue indicator starts flashing.
3.

ENTER PASSWORD

Notes:
The operational range is approximately 8 metres (26 feet)
•
• If signal strength is weak and connection is lost, the soundbar will revert to pairing mode.
This product uses Bluetooth version 4.2. It is not guaranteed to work with all source devices.
•
• This product can only pair with one source at a time.
If no source device is paired within 2 minutes will revert to the previous source.
•
• This device supports A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio Video
Remote Control Profile)
0000 (zero four times). When it pairs the blue indicator will light up solidly.