Quax AVENUE Manuel page 22

Quax
AVENUE
®
3. Unfolding the pram
Open the locking mechanism on the right side of the pram (1b). Pull up the handle until the frame automa-
tically locks with an audible click (1a-3). Push the brake section holders over the frame until locked with a
click (2).
4. Use of the rear wheels
Push on the central cover of the rear wheels in order to remove the wheels of their axis (4). To assemble the
wheels press on the central push-button and press the wheels on their axes until they snap (5).
Attention : before use inspect all wheels if they are securely fastened.
5. Use of the front pivot wheels
Push the front wheels with their anchor (7) into their intended place on the frame until they automatically lock
with an audible click (8). Make sure the wheel is properly secured. Repeat for the second wheel. The front
wheels are equipped with a locking mechanism for forward travel only. To do this turn the locking mechanism
ring outwards (9).
Removing the wheels : press the button on the locking mechanism (10) and slide the wheel off its axle (11).
Repeat for the second wheel.
6. Use of the handle
In order to adjust the height of the handle push both buttons on the side of the frame (9a and 9b) and move
the grip.
22
51-508-xx
Kinderwagen Landau
Kinderwagen Pram