Norwell 1188-MB-CL Instructions De Montage

Each Norwell light fixture has a mounting bar or plate to secure it to the electrical junction box. No
matter what type of mounting bar/plate your fixture uses, installation requires three basic steps.
1. Attach the mounting bar/plate to the electrical junction box.
2. Connect the electrical wires from the junction box to the electrical wires from the fixture.
(Black to Black, White to White and Green to Ground)
3. Secure the fixture to the mounting bar/plate.
INSTALLATION OF FIXTURE
1) CONNECT THE ELECTRICAL WIRES FROM YOUR
POST TO THE WIRES FROM THE MOUNTING
PLATE PLATE USING WIRE NUTS. (BLACK TO
BLACK, WHITE TO WHITE, GREEN TO GROUND)
2) ATTACH THE MOUNTING PLATE TO THE POST,
USING THE (3) WOOD SCREWS. ENSURE THE
MOUNTING PLATE IS HAS BOTTOMED OUT ON
THE POST.
3) LAMP FIXTURE WITH THE REQUIRED LAMP TYPE
AND WATTAGE PER FIXTURE.
4) ATTACH THE FRAME TO THE MOUNTING PLATE
WITH THE 4 THUMB SCREWS PROVIDED. LINE
UP THE THREADED HOLES FROM THE FRAME
TO THE HOLES ON THE MOUNTING PLATE.
!
MOUNTING BASE
(4) THUMB SCREWS
WIRE NUTS
(BY OTHER)
©
INSTRUCTIONS
FRAME
LAMP
POST
1188-MB-CL
(3) WOOD SCREWS