Care And Cleaning - KitchenAid KCG0702 Mode D'emploi

CARE AND CLEANING

CLEANING THE BURR GRINDER AND BURRS
IMPORTANT: To avoid damage, never wash or immerse the Burr Grinder main body,
cutting burrs, burr-shaft assembly, or faceplate in water, or place in the dishwasher.
After using the Burr Grinder, remove
the bean hopper, lid, and grind jar.
Wash these pieces by hand with
1
a soft cloth, in warm sudsy water;
or, wash in the top rack of the
dishwasher.
Remove the faceplate assembly by
3
loosening the screws on either side.
Screws can be loosened by hand.
IMPORTANT: If the Burr Grinder is used frequently, the burrs should be cleaned
regularly for best performance. Cleaning enables the burrs to achieve the finest,
most consistent grinds possible.
FOR DETAILED INFORMATION ON CLEANING THE BURR GRINDER:
Visit www.kitchenaid.com/quickstart
recipes, and tips on how to use your Burr Grinder.
W11381672A.indb 9
Clean the Burr Grinder main body
and all its parts by hand only.
Wash with a soft, damp cloth. Dry
2
thoroughly with a soft dry cloth. Do
not wash in the dishwasher. Do not
immerse in water.
Pull the burr-shaft assembly out
to clean with the other parts. Using
the burr-cleaning brush, clean the
4
burr mounted on the burr-shaft
assembly and the burr mounted
in the motor housing.
for additional Instructions with videos, inspiring
CARE AND CLEANING | 9
8/21/2019 4:41:54 PM