Trilite DLGN-L1 Instructions D'installation

IMPORTANT SAFETY INFORMATION
CAUTION!
The individual user should determine prior to use whether this device is suitable,
adequate or safe for the use intended. Since individual applications are subject to great
variation, the manufacturer makes no representation or warranty as to the fit or suitability
of these devices for any specific application.
Setup and Mounting
Installation:
1. Select a mounting location suitable to support the weight of the unit. Use 1/4" lag bolts with expansion
anchors for securing to a solid structure. When mounting to a wood framed building structure, the unit must
be bolted directly to a stud using 1/4" lag bolts.
2. To gain access to the base enclosure for mounting, remove the two fasteners located at the top of the
housing. Slide the yellow cover up the length of the flexible stainless steel tube to expose the interior
and back-plate assembly.
3. Mount unit upright as shown. Recommended mounting height is 4 to 5 feet from the floor (bottom of
enclosure). Drill appropriate sized holes for the fasteners/wall anchors using the four key-hole slots in the
back-plate assembly. Mount the unit as close to the door track as possible without interfering with moving
parts of the door.
4. When the unit is securely fastened to the wall, slide the yellow cover back down into place and re-install the
two top fasteners.
5. Plug the unit into an electrical outlet compliant with the ratings as specified on the product label.
WARNING!
This fixture is designed for installation in general Non-Hazardous locations in accordance with the National
Electrical Code and applicable local electrical codes.
Note: Electrical Rating for this LED module is 120-240 VAC, 50/60Hz, 14 Watts
LIMITED WARRANTY
If it appears within one (1) year from date of delivery to Purchaser that any products or component parts do not conform exactly to the specifications and physical dimensions referred
to above, and the Purchaser, at its expense, returns the product or component parts to the Seller together with a report of defects, the Seller shall review the inspection report and
inspect the items and shall authorize, at its option, either the repair or replacement of any non-conforming products or component parts, whether on warranty, contract of negligence,
shall not in any case exceed the amount to be paid by the Seller in obtaining and repair or replacement of non-conforming products or component parts, and upon expiration of the
warranty period, all liability of the Seller shall be terminated.
Seller shall not be liable for any injury, loss or damage, direct or consequential arising out of the use or the ability to use the product. This warranty gives specific legal rights. You
may have other rights, which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so that the above limitation of
exclusion may not apply to you.
info@triliteinc.com t: 1-773-384-7765
|
INSTALLATION INSTRUCTIONS for
Model DLGN-L1 LED Loading Dock Light
with Integrated LED Module
f: 1-773-384-5115 www.triliteinc.com
| | | Designers and manufactures of specialty electrical products. Since 1922.
NEW! 45° angle
953073 | REV - 7/15