Gigabyte P55 Serie Mode D'emploi page 2

Congratulations on your purchase of the GIGABYTE Notebook.
This manual will help you to get started with setting up your notebook. The final product
configuration depends on the model at the point of your purchase. GIGABYTE reserves the
right to amend without prior notice. For more detailed information, please visit our website at
www.gigabyte.com
Using GIGABYTE Notebook for the First Time
1 Connect the power cord to the AC adapter.
2 Connect the AC adapter to the DC-in jack on the right side of the notebook.
3 Connect the power cord to the power outlet.
IMPORTANT
Ensure that your Notebook PC is connected to a grounded power adapter before turning it on for the first time.
•
• When using your Notebook PC on power adapter mode, the socket outlet must be near to the unit and easily accessible.
• Locate the input/output rating label on your Notebook PC and ensure that it matches the input/output rating information on your power adapter. Some Notebook
PC models may have multiple rating output currents based on the available SKU.
• Power adapter information: Input voltage: 100-240Vac ,- Input frequency: 50-60Hz ,- Rating output voltage: 19.5V ,9.23A or 19.5V, 10.3A
Switching on the Power
After you turn on the Notebook for the very first time, do not turn it off until the operating system
has been configured. Please note that the volume for the audio will not function until Windows
Setup has completed.
Booting Up the Notebook for the First Time
Depending on your configuration, the Microsoft
you will see as the notebook starts up. Follow the on-screen prompts and instructions and enter
your personal information to complete the setup of the Windows
3
1
®
2
®
Windows Boot Screen will be the first screen that
®
Operating System.
1
®