Ultenic U10 PRO Mode D'emploi page 8

Instructions for Use
Charging indicator light:
Flashes red: battery require charging.When all three blue led stop flashing battery is fully charged
ATTENTION: It is recommended to charge your product after each use to maintain
maximum performance.
NOTE: This product takes �-� hours to charge. Before the first three uses of the vacuum
cleaner, however, �� hours of continuous charging is required.
CAUTION! Do not try to open the battery and repair it yourself.
NOTE: As a safety precaution, the vacuum cannot be switched on while the vacuum is
charging.
Turning on the vacuum
Press the on/off button to turn on the vacuum.
Switch to boost mode
To switch between low power and high power,
press the boost button.
Charging the vacuum cleaner
NOTE: When the charging indicator light flashes during
use, the vacuum cleaner battery is running low and
requires charging.
Insert the charger cable into the battery charging port