Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3. Use a #2 Phillips screwdriver to tighten the captive screw.
Series 009, sizes 1" – 3"; Series 909 Small, sizes ¾" – 2"
1. Align the deflector to fit inside the relief valve. (For Series
009, sizes 1" to 2" only. Some sensor connection kits
include multiple deflectors. Install the deflector designed
specifically for the backflow valve size in use.)
3. Tighten the bolts to secure the deflector and the flood
sensor. Do not overtighten.
• For Series 009 sizes 1" to 1½" and Series 909 Small
sizes ¾" to 1", use a
• For Series 009 sizes 2" to 3" and Series 909 Small sizes
1¼" to 2", use a ½" wench.
⁄
" Allen wrench.
3
16
2. Position the flood sensor on the relief valve and insert the
two mounting bolts.
4
Publicité
Table des Matières
