Table des Matières
Publicité
EN
To install batteries
The battery compartment holds
"
two
AA " batteries.
1. Push the latch to open the
battery cover.
2. Insert two new "AA" alkaline
batteries,following the polarity
(+/-) as indicated on
the pole
plate.
3. Securely close the cover.
NOTE:
Always turn off the tool before installing or replacing the
batteries.
Remove the batteries from the tool when not using it for
extended periods.
The AA batteries should match each other in brand and
type.
Do not mix old and new batteries.
Remove depleted batteries immediately, and dispose of
them according to the laws and regulations governing
your community.
Using your self-levelling cross-line laser level
Self-levelling mode
In this mode, the tool will level itself if it is within ±4° of horizontal.
1. Place the self-levelling cross-line laser level on a at, smooth
surface that is within ±4° of
horizontal.
2. Turn the tool on by sliding the power switch to the up position.
The self-levelling cross-line laser level will automatically level
within 5 seconds.
The LED indicator will shine green.
3.
When the self-levelling cross-laser out of levelling，the LED
will turn to red and the laser line will blink.
To turn off the laser lines, slide the switch to down position.
4.
WARNING!
When turning the laser on, always be aware of
protecting your eyes and the eyes of those
around you. Never point the laser light at
anyone's face, including your own.
Applications
Your self-levelling cross-line laser level can be hand-held for point
marking and simple alignment by sight . It is ideal for the following
applications:
Hanging pictures, photos, or artwork on walls
Wallpapering and stencil work
Framing doors and windows
Installing electrical wiring and pipes
Mounting wall xtures, electrical outlets, switches and lighting
Installing a drop ceiling
Painting
Installing closets
Laying tile and ooring
Working Advice
Working with the Tripod (see figure A)
A tripod offers a stable, height-adjustable measuring
support. Place the measuring tool via the tripod mount
on to the 1/4" male thread of the tripod and screw the
locking screw of the tripod tight.
If the equipment is used in a manner not specified by the
manufacturer.the protection provided by the equipment may
be impaired
Holding Laterally against a Wall or Object (see figure B)
For quick checking of heights, the measuring tool can be held
by the contact surfaces laterally against a vertical wall, cab-
inets, etc. Take care to hold the measuring tool straightly and
calmly.
Laser Viewing Glasses (Accessory)
The laser viewing glasses filter out the ambient light. This
makes the green light of the laser appear brighter for the eyes.
Do not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tion of the laser beam, but they do not protect against laser
radiation.
Do not use the laser viewing glasses as sun glasses or in
traffic. The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
Maintenance and Service
Maintenance and Cleaning
Store and transport the measurin g tool only in the supplied
protective pouch.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
Regularly clean the surfaces at the exit opening of the laser
particular, and pay attention to any fluff of fibres.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts.
Disposal
Measuring tools, accessories and packaging should be sorted
for environmental-friendly recycling.
Do not dispose of measuring tools and batteries/rechargeable
batteries into household waste!
Warranty Period
We offer a 36-month warranty for its machine.
Only for EC countries:
According to the European Guideline
2012/19/EU, measuring tools that are no
longer usable, and according to the Europe-
an Guideline 2006/66/EC, defective or
used battery packs/batteries, must be col-
lected separately and disposed of in an en-
vironmentally correct manner.
Subject to change without notice.
35
27
Publicité
Table des Matières
