LCD OSD (On-Screen Display) Configuration
Note: Once the B021-000-17 console has been
connected to a powered-on server or KVM switch
and turned on, the console and LCD monitor will go
into sleep mode automatically when the console
cover is closed. When the unit is in sleep mode,
raising the console cover will automatically restart
the console and LCD monitor. To turn off the
console completely, press the power on/off switch.
The LCD OSD allows you to set up and configure
the 17-inch LCD monitor:
• To bring up the LCD OSD main menu, press the
MENU button.
• Use the < or > buttons to navigate through the
settings.
• After navigating to a setting choice, use the
MENU button to bring up the adjustment screen.
• When making adjustments, > increases the value;
< decreases the value.
• When you are satisfied with your adjustment,
press the AUTO button to make the change and
return to the previous screen.
• When all of your adjustments have been made,
press the AUTO button toclose the LCD OSD.
Rackmounting
The B021-000-17 is designed for mounting in a 1U
rack system. The various mounting options are
explained in the sections that follow.
Standard 4-Post Rackmounting
The standard rackmounting brackets that come
attached to the B021-000-17 allow the unit to be
installed in standard 1U racks by a single individual.
Slide out the rear mounting brackets from the
1
console and mount both brackets (separate from
the console) to the inside rear of a standard 1U
rack system using user-supplied screws.
Take the console and gently slide it into the two
2
rear-mounted brackets in the rack and secure the
console in place by inserting user-supplied
screws.
NOTE: A fastening tab on each mounting bracket
temporarily secures the front of the console to the
rack system posts during mounting, allowing a single
installer to retrieve and insert the four screws at the
front of the console without assistance.
2-Post Rackmounting
The B021-000-17 can also be mounted in a 2-post
rack using the optional 2-Post Rackmount Kit
(model: B019-000). The mounting hardware allows
for the console to be opened with the drawer in any
position. The kit provides added stability and
prevents the console frame from twisting. See the
B019-000 manual for detailed mounting instructions.
LCD OSD Function Diagram
1
2
3