Warranty Terms - VENSO Growlight Quattro Double Manuel

Grow Light Quattro Double
60W Grow light

Warranty terms

Thank you for choosing a grow light from EcoSolutions, which
is developed for us by Parus, in Korea. This product has been
thoroughly tested and inspected to ensure reliable performance
and operation.
Warranty policy
Your grow light is covered by a two-year limited warranty. The
warranty is valid from the date of purchase shown on your
receipt. In the event of a warranty claim you should contact our
service department. You will find contact details at the end of
this manual.
Exceptions to the warranty
The warranty is not valid if the product has been:
•
connected to a dimmer control
•
connected to the wrong voltage or to a dimming ballast
•
used outside the recommended temperature range
•
subjected to mechanical damage, such as falling on to a
concrete floor
•
dismantled for troubleshooting/repair
Please read the user instructions before using the grow light.
Save these instructions for future reference.
Installation
Hang the grow lamp up using the included accessories,
for instance two hooks attached to the ceiling above the
planted area. Then plug the power cord into a power
socket. You can use an external timer to set a time
(6–12 hours per day for overwintering, 16–18 hours for
growing).
Positioning and height above plants
Make sure you position the grow lamp correctly,
whatever growing application it is used for. The further
away the lamp is from the plants, the more the light will
spread. If you hang the lamp too close, the leaves may
become yellow due to too much light. The recommended
minimum distance between the light and the top of the
plant is 20 cm.
When hung at a height of 75 cm, the grow lamp illumina-
tes an area of 1 x 1.4 m, which is equivalent to 1.4 m2.
This is the maximum recommended distance for growing
plants. The following recommendations apply for different
growing applications:
Growing: 0.3–0.5 m
Extra light: 1 m
Overwintering 1.5–2 m
Storage and care
Keep the lamp and packaging out of reach of children.
There are no user-serviceable parts inside the LED light.
12
Safety instructions
Before you start using the grow lamp – read and follow these
instructions:
•
the lamp is not intended for outdoor use
•
temperature range -40°C to +35°C
•
make sure your hands are dry during installation
•
the lamp must be well ventilated – it must not be installed in a
sealed enclosure
•
do not connect the lamp to a dimmer control
•
do not look directly at the light
•
handle the lamp with care when connecting it to the electrical
supply, to avoid risk of electric shock
•
the lamp casing gets hot (~40°C) after a period of use
•
any electrical installation work that is required to install the
lamp must be carried out by a qualified electrician
•
do not use the lamp if it will not light up, starts flashing or if
the light output is reduced
•
in the event of a fault, switch off the light fitting immediately.
Never try to repair the lamp yourself, as this could cause
serious damage and void the warranty
Temperature
Recommended ambient temperatures:
Germination and growing: 22–24°C
Overwintering: +5 – +10°C
Technical data
Model designation
EAN number
Power
Voltage
Rated current
Working temperature
Mercury content
Dimmer function
IP rating:
Dimensions (L x W x H) 655mm x 160mm x 95mm
Weight
PPFD*
Beam angle
Light colour
Certifications
Warranty
Lifetime LED
*PPFD is a measure of the amount of useful light for
growing.
PGL-RBC-600-2-60
7350067690199
60 W
90~245 VAC, 50~60 Hz
320 mA
-40°C – +35°C
NO
NO
IP 54
3,35 kg
570 µmol at 200mm
349 µmol at 300mm
90°
Warm red, red, blue-white
CE, RoHS, LVD, EMC
2 years
35,000 hours