Télécharger Imprimer la page

Little Tikes Hide & Seek Climber & Swing Instructions De Montage page 3

Publicité

Les langues disponibles

Les langues disponibles

• Instruct children to remove their bike or other sports helmet before playing on this product.
• Dress children appropriately: do not allow children to wear loose-fitting clothing including
ponchos, scarves and garments with drawstrings. Well-fitting shoes must be worn at all times.
• Instruct children on proper swing use for their safety:
• Do not twist chains. Do not swing empty seats.
• Children should keep hands free of objects, inside of swing, and hold onto the ropes.
• Do not get off the swing while it is in motion.
• Do not walk too close to, in front of, behind, or between moving items.
• Always wear well-fitting shoes while swinging.
• Always sit with full weight in the center of the seat.
• Do not twist chains or ropes or loop them over the top support bar since this may reduce
their strength.
• Do not use the equipment in a manner other than intended.
• Do not allow children to climb on product when product is wet.
• Instruct children not to attach items to the product that are not specifically designed for
use with the product such as, but not limited to, jump ropes, clotheslines, pet leashes,
cables and chains, as they may cause a strangulation hazard.
MAINTENANCE
Failure to perform periodic checks could cause this product to overturn or cause a fall.
The following checks should be performed at the beginning of each season and twice monthly
during the usage period:
• Reinstall any plastic parts, such as swing seats or any other items that were removed for the
cold season.
• Tighten all hardware.
• Lubricate all metallic moving parts at the beginning of the play season and twice per month
during the play season.
• Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose,
cracked, or missing.
• Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or
other deterioration. Replace if any of these conditions exist.
• Check metal parts for rust. If found, sand and repaint using a nonlead-based paint meeting
the requirements of 16 CFR 1303.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and
to maintain appropriate depth. Replace as necessary.
• Take this product indoors or do not use when temperatures fall below 0°F/-18°C.
• Owners shall be responsible for maintaining the legibility of the warning labels.
DISPOSAL
Disassemble and dispose of equipment in such a manner that no hazardous conditions such as,
but not limited to, small parts and sharp edges exist at the time equipment is discarded.
3

Publicité

loading

Ce manuel est également adapté pour:

630293