D-Link DSM-260 Guide D'installation page 4

Connect the DSM-260 to Your TV
l manuals and user guides at all-guides.co
Plug the DSM-260 to an available HDMI input on your TV or
1
receiver.
Plug the supplied micro USB cable to the USB port on the
2
DSM-260. Connect the other end of the cable to a USB port
on your TV or to a USB power adapter (not included). The LED
on the top of the DSM-260 will be lit green when it is receiving
power.
Note: The Micro-USB port is only for power, not data transfer.
Connect the DSM-260 to Wi-Fi
There are 2 ways to connect the DSM-260 to your Wi-Fi network:
WPS and through a web browser.
Note: If you wish to use Miracast streaming, you do not have to
connect the DSM-260 to your Wi-Fi network.
Connecting to Wi-Fi Using WPS:
Press the button on the side of the DSM-260 for less than 3
1
seconds to activate WPS. The LED will flash green.
Press the WPS button on your router within 60 seconds.
2
A wireless connection will be configured automatically and
3
the LED on the DSM-260 will turn solid green.
4
DSM-260