AVer DL10 Manuel page 19

Wall Mount Installation (Optional)
1. Use two M2 x 4mm screws (in the DL camera package) to secure the cable fixing plate (in the DL
camera package) to the camera. Plug in cables. Use 3 cable ties (in the DL camera package) to
secure the cables and cable fixing plate.
2. Use the drilling paper included in the package to drill the holes in the wall where the user wants to
mount the camera.
3. Use the screws specified below (not included) to secure the L-mount bracket onto the wall.
[Note] For cement wall: M4 x 20mm self-tapping screws (x4) + plastic conical anchor
For wooden wall: M4 x 20mm self-tapping screws (x4)
4. Then, assemble the L-mount brackets + with 2 screws (M4 x 8mm, included in the package).
1
2
Ø5.50[Ø0.22]
P/N: 303AU340-AGR
4
46.00[1.81]
51.00[2.01]
A
B
3
9
A