Publicité
Les langues disponibles
Les langues disponibles
1×2 HDMI 4K2K Splitter
Quick Installation Guide
All brand names and trademarks are properties of
their respective owners
SYSTEM REQUIREMENTS:
● HDMI equipped source devices such as a DVD/Blu-ray play with
HDMI cables or DVI to HDMI cables
● HDMI equipped displays (TVs or monitors) with HDMI cables
PANEL DESCRIPTIONS:
Front Panel:
Output1
Output2
HDMI OUTPUT
LINK LEDs
HDMI OUTPUT: Connect each of the output ports to the HDMI display
for simultaneous HDMI distribution.
LINK LEDs: These LEDs will illuminate when the HDMI outputs are
connected to the display with signal display on screen.
HDMI INPUT: Connect the input port to the HDMI or DVI output of your
source equipment such as DVD player or set-top box.
INPUT LED: The input led will illuminate when connect to a HDMI
source.
POWER LED: The power LED will illuminate when the unit is powered.
5 V/1A DC: Connect the 5 V/1A DC power supply into the splitter and
Plug the adaptor to AC wall outlet.
Ver. 1.0
Back Panel:
5 V/DC, 1 A
Input
POWER
5 V/DC, 1 A
HDMI
LED
INTPUT
INTRODUCTION:
This high performance HDMI splitter provide one HDMI into two HDMI
outputs and supports 4K2K, Full 3D, 12-bit Deep Color as well as High
Definition Lossless Audio. With its 3Gbps bandwidth and the additional
features of the latest HDMI standards you can be sure of great HDMI
distribution.
APPLICATIONS:
● Simultaneously display one HDMI source on two TVs/projectors
● Showroom display
● University lecture hall display
● Retail sales display
● Commercial presentation switcher/scaler
FEATURES:
● Integrated HDCP decryption/encryption engines which are compliant
with HDCP Rev 1.3 specification
● Wide Frequency Range: 25MHz - 340MHz
● Supports HDTV resolutions up to 4K2K
● Supports 1080p@60Hz, Deep Color 12-bit
● Supports LPCM 7.1CH, and DTS-HD Master Audio
● Supports Full 3D
PACKAGE CONTENTS:
● 1 set 1×2 HDMI 4K2K Splitter
● 1×5 V/1A DC Power Supply Adaptor
● User Manual
1
CONNECTION DIAGRAM:
DVD
OPERATION:
1. Connect the HDMI cable from the HD source to the input port of this
HDMI Splitter.
2. Connect the HDMI cables from your displays (monitor or projector) to
the outputs of this Splitter.
3. Plug the 5VDC power supply into this HDMI Splitter.
4. Turn on the power then the HDTV signal will be distributed to each
HDTV display.
INPUT
LED
SPECIFICATIONS:
Video Bandwidth
Input Port:
Output Ports:
Output Resolution
Chassis Material
Operating Temperature
Storage Temperature:
Relative Humidity
Note: When displaying a 3D signal with a higher bandwidth than
225MHz or a 4K2K resolution source, a High Speed HDMI cable is
required.
3
1×2 HDMI 4K2K Splitter
340MHz/10.2Gbps
1×HDMI (Female connector)
2×HDMI (Female connector)
480i~1080p@50/60,
1080p@24/50/60,
VGA~UXGA, 4K 2K@30
Metal
0 °C~40 °C/32 °F~104 °F
−20 °C~60 °C/−4 °F~140 °F
20~90% RH (non-condensing)
2
TV
TV
4
Publicité
