Venture Lighting Vsolution Serie Instructions D'installation page 2

STEP 3: Attach sensor to fixture or reflector.
For Fixtures without Reflector:
A) Attach sensor to mounting plate B (M3 screws).
B) Attach mounting plate B to fixture (M4 screws).
For Fixtures with Reflector:
A) Unscrew thumbscrew enough to clear reflector lip.
B) Firmly pry open lever spring and place sensor on reflector. Slowly release spring against inside of
reflector to secure sensor.
C) Tighten thumbscrew to further secure sensor to reflector lip.
Figure 3: Attach sensor to reflector
(800) 451-2606 VentureLighting.com
Figure 2: Attach sensor to fixture
(fixture without reflector)
Figure 4: Tighten thumbscrew