Operating Instructions - Skil PWRCORE 12 RO502601 Guide D'installation

OPERATING INSTRUCTIONS

WARNING
fluid or allow a fluid to flow inside them.
certain industrial chemicals, and bleach or bleach-containing products, etc, can cause a short
circuit.
WARNING
could result in serious personal injury.
WARNING
modification is misuse and could result in a hazardous condition leading to possible serious
injury.
This cordless Bluetooth speaker must be used only with the battery packs and charger
listed below:
Battery Pack
2Ah
SKIL BY500101
NOTICE:
Please refer to the battery and charger manuals for detailed operating information.
To Attach Battery Pack (Fig. 2)
a) Align the raised portion on the battery pack
with the grooves on the back of the Bluetooth
speaker, then slide the battery pack onto the
Bluetooth speaker as shown.
b) Make sure that the latch on the battery
pack snaps into place and that the battery
pack is secured to the tool before beginning
operation.
NOTICE:
When placing the battery pack onto
the tool, be sure that the raised rib on the
battery pack aligns with the groove in the tool
and that the latches snap into place properly.
Improper attachment of the battery pack can
cause damage to internal components.
To Detach Battery Pack (Fig. 2)
Depress the battery-release button, located on the front of the battery pack, to release the
battery pack. Pull the battery pack out and remove it from the speaker. (Fig. 2)
To reduce the risk of fire, personal injury, and product damage due to
a short circuit, never immerse your tool, battery pack or charger in
If any parts are damaged or missing do not operate this product until
the parts are replaced .
Do not attempt to modify this speaker or create accessories not
recommended for use with this speaker .
4AH
SKIL BY519801
Corrosive or conductive fluids, such as seawater,
Use of this product with damaged or missing parts
Fig. 2
Any such alteration or
Charger
SKIL QC535701
Detach
Attach
Battery-
Release
Button
9