Aqueon ProFlex Manuel D'instructions page 9

9. Position drip tray from Biological Filter Kit on top of second row of tabs in chamber 2.
10. Slide adjustable wall down so that spout rests on drip tray.
NOTE: Water pressure in chamber 1 holds
the wall flush against chamber 2 when in
operation. After the unit is running, it may
be necessary to push the wall against
chamber 2 if it has been pushed out by
Bio Balls.
11. Place sump in desired position underneath aquarium.
12. Attach drain hose(s) from Megaflow™ overflow kit(s) or ProFlex overflow box(s) to inlet
elbow fitting(s).
13. Position submersible return pump within chamber 3.
14. Attach return tubing to pump outlet. Be sure the return tubing contains either a check valve
(not included) or a siphon break to prevent siphoning of the aquarium into the sump during a
power outage.
Suggested Aqueon
®
QUIET FLOW
SUBMERSIBLE PUMP
1700
2300
3000
4500*
6000*
8000*
*Pumps may be used submersibly or externally.
15. Other devices such as protein skimmers and chemical reactors can be set up within chamber 3
if appropriate to the design of the device. Or they can sit outside the sump with their inlets and
returns located within chamber 3.
Suggested Coralife
®
CORALIFE
SUPER SKIMMER
65
External only
125
220
Submersible Pumps
PROFLEX PROFLEX
MODEL 1 MODEL 2
x
x x
x x
Protein Skimmers
PROFLEX PROFLEX
MODEL 1 MODEL 2
Berlin or
x
x
PROFLEX PROFLEX
MODEL 3 MODEL 4
x
x x
x x
x
PROFLEX PROFLEX
MODEL 3 MODEL 4
x x
Berlin or
External only x
9