Denon Professional DN-410X Guide D'utilisation page 3

User Guide (English)
Introduction
DN-410X is a rackmount audio mixer with 10 channels and Bluetooth
for professional A/V applications, conference rooms, nightclubs, and restaurants, this mixer
features balanced XLR inputs, balanced 1/4" (6.35mm) TRS inputs, and simple single-button
Bluetooth pairing.
Please see this guide's
system, and then refer to the
Box Contents
DN-410X
Power Cable
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit denonpro.com.
Setup
Items not listed under
1. Use either XLR cables or 1/4" (6.35mm) cables to connect the DN-410X's outputs
(balanced or unbalanced) to your loudspeakers, mixer, amplifier, or other device that
accepts line-level inputs (this device must be powered off).
Important: For stereo operation, make sure all left (L) and right (R) outputs are connected
to left and right inputs, respectively.
2. Use either XLR cables or 1/4" (6.35mm) cables to connect the DN-410X's inputs (mic or
line) to your microphones or other audio input sources.
3. Use the included power cable to connect DN-410X's power input to your power source.
Important: Do not use DN-410X near a microwave oven, which can interfere with the
reception.
4. Power on your audio input sources first, power on DN-410X, and then power on your
loudspeakers last.
See the Connection Diagram
Setup chapter to learn how to integrate DN-410X with your audio
Operation chapter to start using DN-410X.
Introduction > Box Contents
on the next page.
®
connectivity. Designed
are sold separately.
3