Transport And Storage; Maintenance - Texas A/S TG 620 Manuel De I'utilisateur

9. Transport and storage

Transport

To avoid any spillage of fuel and oil is it important that the engine is placed horizontal
during transport.
Storage

Let the engine run till it stops.

Loosen the drain screw on the carburettor and drain the remaining fuel.

Reinstall the drain screw, and mount the fuel tube.

Keep the old fuel in an approved container.

Remove the sparkplug and poor 1 tablespoon of oil into the cylinder, mount the sparkplug.

Do not mount the sparkplug cap. Pull the sparking cord, until there is resistance. This will
close the valves and protect them from rust.

Protect the oil with a thin layer of oil to avoid rust.

10. Maintenance


The purpose of maintenance is to keep the engine in its best possible shape.

Repairs should always be carried through by an authorized dealer.
Interval
Part
Inspect bolts and nuts
Inspect and fill with oil
Change oil
Clean / replace oil filter
Inspect for oil leakage
Inspect air filter
Clean air filter
Clean fuel filter
Inspect sparking plug
Inspect fuel pump
Adjust valves
Inspect valves
* Maintenance of air filter in accordance with the user manual to the machine where the
engine is mounted.
TRANSPORT AND STORAGE
NOTE
For every
Every time 20 running
hrs
X
X
X
X (clean)
X
X
14
For every For every
50 running 100 running
hrs hrs
X
X (clean)
X*
X
X
X
For every
200 running
hrs
X
X