Kaminlicht NE10 Mode D'emploi page 3

Crackling effect
for electric, ethanol and gas fireplaces
Controls:
(1) On/off button:
Turns the speaker on/off
(2) Mode button:
Press to switch between TF and BT mode
(3) Next/Volume +:
Increases the volume and skips the current song
(4) Play/pause:
Plays/pauses the current song and accepts and
Ends calls
(5) Last/Volume -.
Decreases the volume and goes back to the last
song
(6) Micro phone: Micro phone entrance
(7) TF card: TF-card slot
(8) Line-in: AUX-line in
(9) Micro-USB: USB-entrance for charging
Remote control:
(1) On/off switch:
Turns the speaker on/off
(2) Play/pause:
Stops/starts playback
(3) Volume +:
Increases the volume
(4) Volume - :
Decreases the volume
(5) Last:
Starts the previous song
(6) Next:
Starts the next song
(7) BT switch:
Activates the BT search
(8) Mode Switch:
Switches between Bluetooth and SD card
Commissioning: First, the micro TF card must be inserted into the device. To do this, please take the TF card and insert it
into the TF card slot (7) with the golden contact surface facing down. Switch the device on by pressing the on/off button
(1) for two seconds. The blue LED light turns on.
You can use the mode button (2) to switch between Bluettoth and TF mode and turn the crackling effect on and off. If you
long press the Next/Volume + button (3), you will increase the volume. You can adjust the volume accordingly by pressing
the Last/Volume – button (5) for a long time. Please note that a beep will sound at the maximum settings. A music file is
played in an endless loop using the supplied SD card. If you use the box with other music, you can switch the tracks
forwards and backwards by briefly pressing the Next/Volume + button (3) and Last/Volume – button (5).
Charging the battery: Use the cable provided to charge the loudspeaker via the micro-USB input via the USB port on
your computer or a suitable adapter (not included). The red LED indicates that the device is charging.
LED display status:
Before use:
- To get the best battery performance, charge the device completely before putting it into
operation,
- The normal charging time is usually between 4 to 6 hours,
- Only charge the battery if the device switches off or the sound quality is significantly
reduced,
- If you do not use the loudspeaker for a long time, it must be charged at least once a
month.
Bluetooth connection mode: Turn on the speaker and press the mode button (2) in order
to switch to the Bluetooth mode. The blue LED lights will star flashing to indicate the
pairing mode.
The blue LED will flash quickly while it is searching for your device and while connecting. As
soon as the device is recognized, the speaker will appear as Caferria. Choose the speaker in
the BT menu of your device. No password is required. When the connection is established,
the blue LED is on and you will hear a voice. When the connection is ended you will hear
another voice.
AUX IN: With the supplied cable, connect your device to the speaker at the line in (8). The
speaker will switch to Aux mode automatically. The speakers fit any device with a 3.5 mm
output (e.g. smartphones, computers, MP3 players, tablets, etc.).
Telephone: The speaker can be used as a hands-free telephone device, as long as a device
that is capable of accepting or issuing calls in any form is connected. Accept and end calls
by pressing the play/pause button (4) and speak to the micro-phone (6). The distance
between the user and the microphone should not exceed a maximum of 60cm.
Specifications:
Loudspeaker: NE10
Output power: 5 W
Frequency response: 60 Hz to 18 KHz
ENG
Battery:
running time: 8 h (full volume) to 12 h
Type: rechargeable lithium ion battery
capacity: 2000mAh