Bestop Sun Bikini 52421 Instructions D'installation page 7

Section 4
Install Bow Bracket to Side Latch Plate
1
1 Install Bow Support Bracket into the Bow.
2 Install M8 x 1.25x38 Screw make sure the
anti-rotation lip on the bracket is on the
edge of the Side Latch Plate.
3 NOTE:
The 4.0 mm Spacer is only used with the
TrekTop Bracket. Remove screw and 5.5
mm Spacer, Replace it with the 4.0 mm
Spacer then Re attach screw.
P7 - 52421 Rev. I 0422
2
Installation Instructions - Sun Bikini Bronco 4 Door
3
Tools
T50
Torx Driver
Bow Support Bracket
Part #606.51
Qty. 2
Screw, M8 X 1.25 X 38
Part 532.17
Qty. 2
Page 7
Hardware
© 2021 Bestop, Inc.