Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. Do not touch the top of the solar light with any hard material as this could break, scratch or damage
the solar panel.
2. To test the operation of the light you can simply cover the upper surface of the solar panel the light
will active automatically once turned on.
3. If there is high ambient lighting nearby the LED light may be very dim as it is designed to work best
in darkness. his do es not mean that the light does not work and it is just operating based on the
bright surroundings
4. Please charge the light for a full day prior to first use in order for the light to perform at its maximum
capacity.
Reference
1
1
2
Property
Solar Panel
LED
Material
1, Remove carefully all parts from colour box.
2, Turn on the light using the " FLASH/OFF/AUTO" switch to select the lighting effect that you like.
(Diagram b)
3, Insert the sharp point of ground stake into the ground deep enough to hold the light firmly. Then
place the main body on the top of ground stake .(Diagram c)
Battery
Precaution
Parts List
Part Description
Solar string Lights set
Manual
Technical Specifications
Operating Instructions
Turn on the switch to
"FLASH" or "AUTO"
Page 3 of 8
Specification
2V/0.24 Watt Polycrystalline
5x 3000k LED x 9bulbs
Plastic
Quantity
1
1
Publicité
Table des Matières
