Polk Audio magnifi 2 Guide De Démarrage Rapide page 15

Using the Remote Control Learning Function
IMPORTANT: Hold both remotes about 12 in
(30cm) directly in front of the MagniFi 2 when
pressing their respective buttons and make sure your remotes
have fresh batteries.
Entering Remote Control Learn Mode
Make sure your sound bar is powered on, then press and hold the
the sound bar for about 3 seconds. When you hear a two-note tone, release the button.
You should now see white lights on the front of the sound bar bouncing left and right.
STEP 1: Select a Button on your MagniFi 2 Remote
Press and release the button on the MagniFi 2 remote that you want to learn (ex: Volume
Up). You will hear a single tone and see all white lights fading in and out together.
STEP 2: Select a Button on your TV Remote
Press and release the button on your TV remote that you want to assign to the button
you selected in Step 1.
STEP 3: Verify the Results
• If you see the white lights fading in and out again, repeat step 2.
• If you hear a two-note tone and see
• If you hear a single tone and see
14
•••••••••• the command was not learned.
•••••••••• the command was successfully learned.
Autogoods "130"
12" (30cm)
Source button on