Widex mRIC Guide Rapide

THE CHARGER AT A GLANCE
Your new WIDEX mRIC charger is intended to detect and charge your WIDEX
MOMENT™ mRIC (MRR2D) hearing aids.
The charger has a charging well for each hearing aid, and two light indicators
that show the charging status of the hearing aids.
2
3
2
3
4
1
HOW TO GET STARTED
1. Grab the hinged cover 4. The light
on both sides and lift it
indicators flash
upwards.
white 5 times
when the charger
is connected to the
power supply.
2. Pull it over towards the
side with the USB port.
5. The charger is now
3. Connect the cable
ready to charge.
to the charger via the
Micro USB port.
CHARGING INDICATORS
When the hearing aids are inserted in the charger, the light
indicator turns solid yellow while detecting the hearing aid:
Once detected, charging will begin. The light indicator
will flash green to indicate that the hearing aid is low on
battery and less than 40% charged:
The light indicator will glow green to indicate that the
1. Micro USB port
hearing aid is more than 40% charged:
2. Charging wells
3. Light indicators The light indicator will turn solid green to indicate that the
hearing aid is 100% charged:
4. Hinged cover
OVERVIEW OF LIGHT INDICATORS
Flashing White
Flashing Red
Flashing Yellow
For more information, consult the User Instructions that came with your
Widex mRIC charger, or see the tutorial on how to use the charger in the
WIDEX MOMENT™ app.
The charger is connected to the power supply.
One indicator: An error occurred during charging and
the charging has stopped.
Both indicators: An error occurred during charging
and the charging has stopped for both hearing aids.
The temperature of the hearing aid has become too
high during charging and charging is paused.
WIDEX mRIC CHARGER
QUICK GUIDE