Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
Descriptions
The luminaire contains a constant-current driver and LED light sources. It works under technical conditions as the
product labels indicate.
Technical Parameter
Module
Power
Input Current
Working Environment
Storage Environment
Mounting Height
Dimensions
Net Weight
Project Area
Degree of Protection
Notes: The net weight of the above products includes lamp body with a tolerance of 5%.
The power above are maximum rated power of the model subject to tolerance of 10%.
Horticulture lighting in greenhouse.
Installation
INSTALLATION OR ASSEMBLY INSTRUCTIONS
1. Take out the fixture, unfold the bracket.
LED Horticultural Luminaires
TF52P-6
650W
Max
14.4A
-40℃~+40℃，10%~90%RH
-40℃~+50℃，10%~90%RH
3~5m
1175x1095x87mm
11.0kg
1.287m
2
IP54
IP65
IP66
2. Take out the fixture, unfold the bracket.
3. Mount the fixture with steel rope at a proper hight.
Connect input wires with DC power supply.
Make sure it grounded sufficiently. Installation finished.
Installation Instructions
_____
IP67
Other
Handle carefully. Watch your hand while upfolding.
Publicité
Sommaire des Matières pour HPWINNER TF52P-6
- Page 1 Installation Instructions Descriptions The luminaire contains a constant-current driver and LED light sources. It works under technical conditions as the product labels indicate. Technical Parameter LED Horticultural Luminaires TF52P-6 Module 650W Power 14.4A Input Current -40℃~+40℃，10%~90%RH Working Environment -40℃~+50℃，10%~90%RH Storage Environment...
- Page 2 Installation Instructions LED Horticultural Luminaires Light Source Power MODULES Input maxmin constant current Max650W (2835：18P14S+3535：9P2S)*6P 14.4A Caution Disconnect or turn off power before installation, maintenance and wiring. Cable connection must be insulated and waterproof. The light source of this luminaire is not replaceable. When the light source's lifetime comes to an end, it is the whole luminaire that should be replaced. Warning: Danger! Electric shock risk! (via IEC 60417-6042（2011-11））...
- Page 3 Installation Instructions Prudence Déconnecter ou couper l'alimentation avant l'installation, l'entretien et le câblage. Le raccordement du câble doit être isolé et imperméable. La source lumineuse de ce luminaire n'est pas remplaçable. Lorsque la durée de vie de la source lumineuse arrive à son terme, c'est l'ensemble du luminaire qui devrait être remplacé.