Hathaway POWERSTROKE BASEBALL Instructions De Montage page 4

THANK YOU! ASSEMBLY INSTRUCTIONS
1. Connect base center poles (A).
2. Attach the base legs (B) to the base center (A).
4. Slide the net (D) up the poles and connect
the clip at the top of net to the net poles.
6. Attach bungee cords (F) along bottom of
center base (A) to attach net (D) to pole.
WARNING: Make sure the net is secured into the ground before play. During play, make sure the ground
stakes are secured as loose ground stakes may cause injury.
3. Attach two net pole pieces (C) together. Slide net poles (C) into the
side net sleeves (D). Insert net poles (C) into the base legs (B).
5. Attach hooks at the bottom corners of the
net to the loops on the base legs (B).
7. Place net in the desired location and ensure
it is on level ground. Secure frame with included
ground stakes (E).
NOTE: Care should be taken when pressing in
the ground stakes. Base legs can be bent if
driven too far into the ground on hard surface.
8. Place insert (I) onto
batting stand (H) to hold
ball (G), if not pre-installed.
4