Factory Default; Channel Menu; Channel Scan - Avermedia Hybrid TVBox 11 Guide D'utilisation

AVerMedia Hybrid TVBox 11
3. Use CH▲ or CH▼ buttons to highlight the "Component Output
4. Press Vol◄ or Vol► on the remote to select a desired video output resolution.
5. Press OK button to save the change.

4.3.8 Factory Default

This feature allows you to revert to default factory settings
1. Press the MENU button to display the menu.
2. Press the CH▲ or CH▼ to select the "Setup" menu and press Vol►/OK.
3. Press the CH▲ or CH▼ to select the "Factory Default
4. A confirmation dialog will appear. Use Vol◄ or Vol► buttons to select "OK
confirm the operation, or select

4.4 Channel Menu

4.4.1 Setup the TV Source
1. Press the MENU button to display the menu.
2. Press the CH▲ or CH▼ to select the "Channel" menu
and press Vol►/OK.
3. Use the CH▲ or CH▼ buttons to select "TV Source" and
Press Vol►/OK.
4. Use CH▲ or CH▼ buttons to highlight a TV source
(Antenna, Cable-STD, Cable-HRC, Cable-IRC) and press
Vol►/OK.

4.4.2 Channel scan

1. After finishing setting TV source, press the MENU button to display the menu.
2. Press the CH▲ or CH▼ to select the "Channel" menu and press Vol►/OK.
3. Press the CH▲ or CH▼ to select the "Auto Program" and press Vol►/OK.
4. A warning message will appear.
5. If you want to overwrite the previous program list, use Vol◄ or Vol► buttons to highlight "OK
button. To abort this operation, simply select
4.4.3 Show /Hide Channels
After scanning, available channels will then be listed. Now you can
hide the unwanted programs by check the check box beside each
channel.
1. Press the CH▲ or CH▼ to select the "Channel" menu and
press Vol►/OK.
2. Press the CH▲ or CH▼ to select the "Show /Hide
Channels" and press Vol►/OK.
3. Use CH▲ or CH▼ buttons to highlight a listed channel and
press Vol►/OK. The mark
channel has been hidden.
4. If you want to hide more channels, repeat step 3.
" "
Cancel and press OK button to exit the dialog.
" "
Cancel
will appear, indicating that the
ENG-10
"
.
"
and press Vol►/OK.
and press OK button.
and press OK button to
"
"
and press OK