Publicité
Liens rapides
B36
Blower Kit
Instruction Sheet
ASSEMBLY INSTRUCTIONS
Step 1.
THE BLOWER ASSEMBLY MUST BE DISCONNECTED FROM THE SOURCE OF ELECTRICAL
SUPPLY BEFORE ATTEMPTING THE INSTALLATION.
With pliers, cut the 6 microjoints and remove panel (a). Note: Discard the panel.
Step 2.
Fix the assembly to the back of the stove with the four screws provided.
T
HE BLOWER ASSEMBLY IS INTENDED FOR USE ONLY WITH A STOVE THAT IS MARKED
TO INDICATE SUCH USE.
DO NOT ROUTE THE SUPPLY CORD NEAR OR ACROSS HOT SURFACES!
Panel with
Micro Joints
851528 C
Publicité
Sommaire des Matières pour United States Stove B36
- Page 1 Blower Kit Instruction Sheet ASSEMBLY INSTRUCTIONS Step 1. THE BLOWER ASSEMBLY MUST BE DISCONNECTED FROM THE SOURCE OF ELECTRICAL SUPPLY BEFORE ATTEMPTING THE INSTALLATION. With pliers, cut the 6 microjoints and remove panel (a). Note: Discard the panel. Step 2. Fix the assembly to the back of the stove with the four screws provided.
- Page 2 Parts and Parts List DESCRIPTION PART NO. QTY. Blower Housing Back 25089B Blower Housing Front 25090B Blower Motor 80442 Rheostat w/Nut and Knob 80090 Strain Relief Bushing 80109 Power Supply Cord 80232 Heat Shield 891861 #10 x 1/2 Teks Screw 83172 #12 x 3/4 Teks Screw C23799...