Items Included With The Brocade Dcx 8510-8; Unpacking And Installing The Brocade Dcx 8510-8 - Brocade DCX 8510-8 Guide De Démarrage Rapide

6. Ensure that the air temperature on the air intake side is less than 40 degrees Celsius (104 degrees Fahrenheit)
during operation.

Items included with the Brocade DCX 8510-8

The Brocade DCX 8510-8 ships with the following:
•
Brocade DCX 8510-8 chassis, populated with:
-
Control processor blades (CP8)
-
Core switch blades (CR16-8)
-
Port blades, application blades, and encryption blades (included based on customer specification)
-
Blade slot filler panels (for slots not filled by blades)
-
WWN cards
-
WWN bezel (logo plate)
-
Power supplies
-
Power supply filler panel (included if there are fewer than four power supplies)
-
Blower assemblies
-
Cable management comb
-
Chassis door
•
Accessory kit containing the following items:
-
Brocade DCX 8510-8 Backbone QuickStart Guide
-
Brocade Documentation CD (contains documents related to the Brocade DCX 8510-8)
-
ESD grounding strap
-
USB device
-
RS-232 serial cable. The RS-232 cable has an adapter at one end that can be removed to provide an
RJ-45-style connector.
•
14U Rack Mount Kit with instructions (includes rear brackets and bottom support rails)
Order the Brocade-branded optical transceivers (SFP+, mSFP, and QSFP). The Brocade DCX 8510-8 supports SWL,
LWL, and ELWL transceivers. The mSFPs and QSFPs are SWL transceivers only.
NOTE
For information about the SFP+, mSFP, and QSFP transceivers that are qualified for the Brocade DCX 8510-8, go to
http://www.brocade.com/downloads/documents/matrices/Brocade_Compatibility_Matrix.pdf.

Unpacking and installing the Brocade DCX 8510-8

Use the following procedure to unpack and install your Brocade DCX 8510-8.
Brocade DCX 8510-8 Backbone QuickStart Guide
53-1002366-01
9 of 292