Leggett & Platt CU170 Mode D'emploi page 2

6
Insert the underbed light plug from base 1 into one female plug of the sync
cable, then insert the underbed light plug from base 2 into the other female
plug of the sync cable.
BASE #1 CONTROL BOX
UNDERBED LIGHT
PLUG
7
Turn both bases over
onto their legs.
CAUTION
DUE TO RISK OF INJURY,
TWO ADULTS ARE REQUIRED
TO HANDLE AND MOVE
ADJUSTABLE BASE.
9
Operate the remote control(s) to verify both
bases function in unison. If using only one
remote control to operate both bases, store
the second remote for use as a spare.
If bases do not operate in unison with
the remote, verify dual sync cable
connections are fully seated in both
MFP ports. Unplug both bases, wait 10
seconds, then plug them back in.
MFP
MALE PLUG
NOTE
BASE #2 CONTROL BOX
SYNC CABLE
FEMALE PLUG
8
Plug both bases back into
power outlet.
MFP
UNDERBED LIGHT
PLUG
2