Remote identification method of the remote control :
Learning ID: Press the ID learning button on the receiver for 3 seconds when the LED is on, then press
any key of "1" "2" "3" "4" on the remote control, the LED flashing flashes several times, activated. Each
receiver can learn 4 remote controls, but each remote can only record the first learning zone. If you want
to change the zone ID, delete it first, and then re-learn.
Cancel ID: Press the ID learning button on the receiver for 5 seconds.
The different modes to change with the Remote Control RGBW (réf : SICRORGBW/EVO) :
Sequence
Modes
Red, green and blue
1
Red, green, blue, yellow, purple, cyan and white
2
3
White color strobe
With all red, green and blue on (White strobe)
Red, green and blue. Gradual changes
4
All 7 colors in gradual changes
5
Red and green. Gradual changes
6
Red and blue. Gradual changes
7
Green and blue. Gradual changes
8
9
White color fade & change
White (with red, green and blue) gradually bright and fade
10
Great cycle
All modes change by transition overlap
5. SAFETY INSTRUCTIONS
Please do not install this controller in lightning fields, intense magnetic fields and high voltage.
1. Reduce the risk of component damage and fire due to a short circuit, make sure the connection is
correct.
2. Always be sure to mount this unit in an area with adequate ventilation to ensure proper mounting
temperature.
3. Check if the voltage and power adapter are suitable for the controller.
(please select a DC12-24V constant voltage power supply)
4. Do not connect live cables; make sure that the connection is correct and that no short circuit has
been verified with the instrument before switching on.
5. Please do not open the controller cover and operate it if there is a problem.
The manual is only suitable for this model; any update is subject to change without notice.
Distribué par / Distribuito da / Distributed by NETELEC SRL FR - rue Philemon Laugier - 83400 Hyeres les Palmiers
:
:
: