English; Battery Installation; Product Specifications - Ega Master MasterEX Manuel D'instructions

ENGLISH

1. Remove lens by turning counter-clockwise.
2. Remove the lamp and battery tray.
3. Replace batteries with fresh batteries (follow polarity icons).
4. Insert battery tray into torch (metal tabs facing face up).
5. Insert lamp, then screw lens squarely on threads.
On: Turn lens clockwise to activate.
Off: Turn lens counter-clockwise (to avoid accidental activation back off 1 full turn).
DO NOT OVERTIGHTEN.
If light is not to be used for some time, remove batteries to prevent possible LEAKAGE AND
CORROSION.
Lamp Type: LED
Battery Type: 1.5V Alkaline C-cell (3) (Energizer® E93, Duracell® MN 1400 or Panasonic®
LR14 only)
REPLACEMENT PARTS: 2001 O-ring
WARNING - RISK OF IGNITION DO NOT OPEN IN HAzARDOUS AREA.
4

BATTERY INSTALLATION

ON/OFF
CAUTION

PRODUCT SPECIFICATIONS