Richelieu WF-LT15560-PIR Mode D'emploi

1.Description
Battery operated to get rid of connecting wires,easy installation and good for DIY.Built-in motion sensor,the light will
turn on when people come, turn off after people leave.
Application: Lighting for wardrobes,cabinets,drawers and so on.
2.Profile
3. Installation
1. Put the tag to the place you want to install.
2. Screw to the «+» position.
3. Fix the lamp to the screws' caps.
4.Parameter
Control Way: Built-in motion sensor,the light will turn on when people come, turn off in 40s(Customizable)
after people leave.
Charge Way: USB DC5V (Applicable to all kinds of USB mobile chargers)
Charge Time: about 5H
Stand-by Time: 50 days
Size: 155*60*12mm
5.Accessories
1 pc of lamp,battery,USB charged wire,tag and 2 pcs of screws.
6.Notice
1. Please put the button to the «ON» position before use
2. Please charge when indicator led light flashes.
3. Light's red when charge, light's off when full charged.
4. The motion sensor can not be covered with anything when use or it does not work.
5. Please use Micro USB cable to charge.
6. Please put the button to the «OFF» position if you do not use often.
Motion Sensor Furniture Light
Model:WF-LT15560-PIR