for Living BLUEBAY 088-2063-0 Mode D'emploi page 5

8
Model No. 088-2063-0
Step 2
Requires : B, C, D, E, CC, EE, HH, II, JJ, KK, LL
(1) Attach the side bar (D) to the back leg (C) and front leg (B), using M6x65 combination
hex key (JJ) and wrench (KK). Do not completely tighten until all assembly is completed.
(2) Attach the second side bar (D) to the other set of legs (B and C).
(3) Attach the leg connector (E) to the side bar (D), using M6x35 combination bolt &
hex key (JJ) and wrench (KK). Add M6 Screw Cover (LL).
C
EE
CC
HH
II D
HH II LL
LL
C
B
B
E
D
Step 3
Requires : G, H, I, J, K, L, M, BB, DD, EE, HH, II, JJ, KK, LL
(1) Attach the seat frame (G) to the 2 arms (I and J) by aligning the bottom holes of the
arm (I and J) to the holes on the seat frame (G). Using M8x25 combination bolt &
washer (BB), lightly tighten the bolts using the hex key (JJ).
(2) Attach the back frame (H) to the 2 arms (I and J) by aligning the middle holes of the
arm (I and J) to the holes on the back frame (H). Using M6x35 combination bolt &
washer (EE), lightly tighten the bolts using the hex key (JJ).
(3) Attach the back swing pipe (K) to the arms (I and J), using M6x50 combination bolt
& washer (DD) through back swing pipe (K), arms (I and J), back frame (H), lightly
tighten the bolts using the hex key (JJ).
(4) Attach the front swing pipe (L) to the arms (I and J), using M6x50 combination bolt
Nut (II), tighten the bolts using the hex key (JJ) and wrench (KK). Add screw cover
(LL) as below shown.
(5) Attach the spring hook (M) to the top of the 2 swing pipe (L and K).
M
K
L
H
DD
EE
LL
BB
II
HH
I
DD
M
K
L
J
DD
HH II
G
9
LL