Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connect
Connect to mobile device
1
Enable bluetooth on your mobile device.
2
The app will look for the camera.
• For one camera, it will connect
automatically.
• For more than one camera, the app will
prompt you to select one camera at a
time. Each camera has a unique MAC
ID printed on the back. Use that ID to
select the camera you want to connect.
3
A QR code will display in the app. To
connect your camera to the app, hold the
QR code approximately 3-6 inches
(7-15 cm) from the camera lens.
4
The camera LED turns purple and the
camera beeps.
Connect to Wi-Fi
Be sure you are on the same Wi-Fi network
you wish to connect your camera to.
1
Choose your Wi-Fi network from the
list. Tap NEXT.
2
Enter your Wi-Fi password, if necessary.
Tap DONE.
NOTE: The camera will beep during some
steps in this process.
3
2.7-5.9 in
NEXT
NEXT
Publicité
Table des Matières
