Publicité
Les langues disponibles
Les langues disponibles
Installation
The exact method of mounting will depend on the proposed installation. The product has been designed
to offer a wide choice of mounting methods.
The lamp is polarized, so when connected correctly, the lamp is flashing. Incorrect connection will result
in a steady light.
Maintenance
• The lamp can be replaced by unscrewing the cap's four screws. Replace the lamp only with
original lamp from Daniamant.
• Replace lamp after 12 hours of use.
• Replace complete unit is found to be faulty.
Spare parts
Spare parts for this lighting system are available from Daniamant Limited, at the address shown on the
front page.
Product Disposal Instructions
Daniamant's Survivor Location Lights contain batteries as well as electrical and
electronic components, and must therefore be segregated from the domestic
waste stream and recycled. Disposing of this product correctly will help save
valuable resources and prevent any potential negative effects on human health
and the environment, which could otherwise arise from inappropriate waste han-
dling. Daniamant's lights are marked with the symbol below which conveys that
this waste must be treated separately from household waste.
To ensure compliance with the WEEE and Battery Regulations, the Survivor Lo-
cation Lights placed on the market in the UK or Denmark should be returned to
Daniamant in the UK or Denmark, or deposited in your nearest WEEE Designated Collection Facility,
operated by your Local Authority.
Further copies of this installation and maintenance instructions
are available to download from our website www.daniamant.com
A copy of these instructions must be held with the ships/owners training manual.
2
Publicité
