sauermann MPT-II/Si-CA 8500 Mode D'emploi

EN
Mobile Thermal Printer
User Manual
or too low (20%) rela�ve humidity both effect the print quality.
6) The print paper in poor quality or stored for too long �me also may
reduce the print quality even damage the printer.
7) Be sure to use up the power of the ba�ery before charge it, as it can
ensure the using life of the ba�ery.
3. Storage Precau�ons
1) The printer should be placed in such an environment that the
temperature is between -20°C and 70°C and the rela�ve humidity is
between 5%RH and 95%RH.
2) If the printer will be stored for a long �me, pleas be sure to take out the
ba�ery, otherwise may damage the ba�ery and printer.
3) Normal thermal paper can't be kept too long, if you need to keep the
receipt for a long period, please choose long term effec�ve thermal paper.
4) The print paper should be kept away from high temperature environment
and point-blank sunshine.
4. Ba�ery Safety Precau�ons
Be sure to read the user manual carefully before using the product. Ignore
the following instruc�ons may cause ba�ery overhea�ng, fire, explosion,
damage and/or performance, and reduced product life.
1) Do not allow water, sea water from entering or leaking into the ba�ery. If
the ba�eries internal safety device burn, when charging it, it may produce
abnormal current and/or voltage, or abnormal chemical reac�on when charging
it, then may cause the ba�ery overhea�ng, fire and/or explosion.
2) Do not use or place the ba�ery nearby the stove or other high temperature
places. Excessive heat maybe damage the resin shell and/or the insula�on
materials, there by cause short-circuit inside the ba�ery, then the ba�ery may
be overheated, burning and/or explosion.
3) Do not make the ba�ery contact with the power outlet and/or car cigare�e
3
Content
Precau�ons································································ ········2
1. Safety Precau�ons············································ ···········2
2. Opera�on Precau�ons················································2
3. Storage Precau�ons····················································3
4. Ba�ery Safety Precau�ons ········································ 3
Chapter 1 Brief Introduc�on ································· ·········· 5
1.1 Appearance ·······························································5
1.2 Accessories ································································5
Chapter 2 Specifica�ons ···················································6
Chapter 3 Opera�on Methods··········································7
3.1 Prepara�on before using ··········································7
3.1.1 Li-polymer ba�ery loading ·································7
3.1.2 Paper loading ······················································7
3.2 Basic Func�on····························································8
3.2.1 Printer on ····························································8
3.2.2 Printer off ···························································8
3.2.3 Self-test ·······························································8
3.2.4 Paper loading ······················································8
3.2.5 Standby/Sleep····················································· 8
3.2.6 Paper status alarm·············································· 8
3.2.7 Ba�ery Charging ·················································9
3.3 Bluetooth ·························································· ····10
®
3.4 LED indicator and Buzzer defini�on ·······················11
3.5 So�ware Tools ························································11
1
lighter socket.This may cause high pressure and excessive current , and lead to the
ba�ery overheat, burning and/or explosion.
4) Do not heat the ba�ery or put the ba�ery into fire. This may melt
insula�on material and/or damage safety devices or safety equipment, then ignite
electroly�c solu�on , and cause the ba�ery overheat, burning and/or explosion.
5) Do not use the ba�ery with contrary (+) and (-) loca�on. In the charging
process, this will cause the reverse charging and may cause abnormal chemical
reac�on. During use, may appear unpredictable current excep�on, and cause the
ba�ery overheat, ignite, and/or explosion.
6) Do not make the ba�ery (+) and (-) contact with any metal. Also, do not carry along
or store ba�eries with metal objects, such as necklaces, hair clips and so on.
Ba�ery internal short circuit may cause excessive current,and lead to the
ba�ery overheat, ignite, and/or explosion and the adjacent metal objects
(necklaces, hairpins, etc.) may be overhea�ng.
7) Do not throw or a�ack the ba�ery heavily. If internal safety device of the
ba�eries burn, the ba�ery charging may cause any abnormal current and/or
voltage, and abnormal chemical reac�on, and lead to the ba�ery overheat,
ignite, and/or explosion.
8) The end-of-life ba�ery pack must be disposed of correctly
and only in the containers provided for this purpose.
The user must ensure, at his own expense, that the device
is selec�vely collected and correctly recycled.
4
Precau�ons
1. Safety Precau�ons
1) Be sure to use the specified ba�ery and power source provided by our
company.
2) Connec�on to an improper power source may cause fire,
explosion or damage to the printer.
3) Don't put the ba�ery into fire or water, don't disassemble or modify the
ba�ery, don't be short circuit, otherwise may result in injury or fire or
even explosion.
4) If the printer would not be used for a long �me, be sure to take off the
ba�ery, otherwise the ba�ery may leak liquid which is corrosive, if
improper opera�on causes ba�ery leak, and the liquid is spa�ered
on the skin or clothes, please wash it with water, if spa�ered into the
eyes, please rinse them with water thoroughly and see a doctor.
5) Please do not open the paper case cover when it is prin�ng or just
when prin�ng is over, do not touch the print head with hand or body,
overheat may cause scald.
2. Opera�on Precau�ons
1) Water or other liquid should not spill into the printer, also the printer
should not be expose to the rain, or else may cause printer damage.
2) Please do not open the paper case cover when it is prin�ng,
otherwise the printer may work improperly.
3) If print with serial interface, should not unplug the interface
cable in the course of prin�ng, or else some prin�ng data may be lost.
4) When prin�ng with Bluetooth® interface, the communica�on distance
should be within 10 meters, otherwise the printer doesn't print or prints
rubbish codes.
5) Too high 40°C or too low (0°C) temperature and too high (85%)
2
Chapter 1 Introduc�on
1.1 Appearance
6
Power bu�on
1
Red power indicator
2
1
5
USB interface
3
2
4
Blue status indicator
3 4
Feed bu�on
5
Top cover
6
RS232 interface
8
7
Li-polymer ba�ery cover
8
7
1.2 Accessories
Li-polymer ba�ery Paper roll
Leather case User manual
5
USB cable