Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Wi-Fi Connection LEDs
During Wi-Fi connection, the LED indicates the following.
LED
Blinking Green
Solid Green
Solid Red (for
2 seconds)
Solid Purple
Blinking Blue
Options
Choose your Geofencing and Honeywell Home Membership options (if you skip
them you can change them easily later).
Placement
With Stand
Place the camera in a desired location
for viewing and recording.
On the Wall
You can also mount the camera directly
to the wall without the stand.
Camera state
Connecting to Wi-Fi network.
Connected to Wi-Fi network.
Connection failed. LED will then turn solid purple.
QR Code scan complete.
Go to "Connect to Wi-Fi" on page 3.
Camera has lost bluetooth connection. Unplug camera and
plug it back in. See "Connect the power cord" on page 2
for instructions.
4
Publicité
Table des Matières
